Provider Bridging Commands

OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Provider Bridging Commands

This chapter describes the Provider Bridging (PB) commands.

IEEE 802.1ad standardizes the architecture and bridged protocols to allow Ethernet frames with multiple VLAN tags. Packets through a provider network are doubly tagged with both an:

• Inner (C-VLAN) tag which is the customer network VLAN identifier

• Outer (S-VLAN) tag which is the service provider network VLAN identifier

• bridge protocol provider-mstp

• bridge protocol provider-rstp

• cvlan registration table

• cvlan svlan

• dot1ad ethertype

• show cvlan registration table

• switchport customer-edge

• switchport customer-edge hybrid

• switchport customer-edge trunk

• switchport customer-edge vlan registration

• switchport customer-network allowed vlan

• switchport customer-network vlan

• switchport mode

• switchport mode customer-edge

• switchport mode customer-edge hybrid acceptable-frame-type

• switchport provider-network

• switchport provider-network isolated-vlan

• vlan type

• vlan type customer

Last modified date: 10/12/2023