bridge protocol provider-rstp

OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Provider Bridging Commands : bridge protocol provider-rstp

Use this command to add an IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) bridge.

After creating a bridge instance, add interfaces to the bridge using the bridge-group command. Bring the bridge instance into operation with the no shutdown command in interface mode.

Command Syntax

bridge <1-32> protocol provider-rstp (edge|)

Parameters

<1-32>

Bridge identifier.

edge

Configure as an edge bridge.

Command Mode

Configure mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

#configure terminal

(config)#bridge 2 protocol provider-rstp edge

Last modified date: 10/12/2023