OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : access-if-evpn
access-if-evpn
Use this command to create the evpn mpls access-port.
Use the no form of this command to delete the evpn mpls access-port.
Command Syntax
access-if-evpn
no access-if-evpn
Parameters
None
Command Mode
L2 Sub-interface mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
#configure terminal
(config)#interface xe1.1 switchport
(config-if)#access-if-evpn
(config-access-if)#end
 
Last modified date: 10/17/2023