EVPN MPLS Commands

OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands

EVPN MPLS Commands

This chapter describes the EVPN MPLS commands:

• access-if-evpn

• arp-cache disable

• arp-nd flood-suppress

• arp-nd refresh timer

• clear evpn mpls counters

• clear mac address-table

• dynamic-learning disable

• evpn esi hold-time

• evpn irb-forwarding anycast-gateway-mac

• evpn irb-if-forwarding anycast-gateway-mac

• evpn mpls enable

• evpn mpls id

• evpn mpls irb

• mac

• evpn mpls mac-ageing-time

• evpn mpls multihoming enable

• evpn mpls vtep-ip-global

• evpn multi-homed

• hardware-profile filter evpn-mpls-cw

• hardware-profile filter evpn-mpls-mh

• hardware-profile statistics evpn-mpls

• host-reachability-protocol

• ipv6 address

• mac-holdtime

• nd-cache disable

• show evpn mpls

• show evpn mpls arp-cache

• show evpn mpls counters

• show evpn mpls label alias

• show evpn mpls label esi

• show evpn mpls mac-table

• show evpn mpls nd-cache

• show evpn mpls route-count

• show evpn mpls static host state

• show evpn mpls status

• show evpn mpls tunnel

• show evpn mpls tunnel label

• show evpn mpls xconnect tunnel

• show evpn mpls xconnect tunnel label

• show running-config evpn mpls

• tunnel-select-policy

Last modified date: 10/17/2023