arp-nd flood-suppress
Use this command to completely restrict the flood of ARP/ND packets towards remote PEs or other Access Circuit
This command applies only when the ARP cache and ND cache are enabled. When the ARP cache is disabled, ARP flooding is not suppressed even if this command is given. When the ND cache is disabled, ND flooding is not disabled, even if this command is given.
Use the no form of this command to not restrict the flood of ARP/ND packets.
Note: Not applicable for the AC port which is mapped with ELINE/Xconnect Service.
Command Syntax
arp-nd flood-suppress
no arp-nd flood-suppress
Parameters
None
Default
By default, the arp-nd flood-suppress option is disabled.
Command Mode
Access if evpn mode
Applicability
This command was introduced in OcNOS version 4.0.
Examples
#configure terminal
(config)#interface xe1.1 switchport
(config-if)#access-if-evpn
(config-access-if)#arp-nd flood-suppress
(config-access-if)#end
Last modified date: 10/17/2023