arp-nd refresh timer
Use this command to configure aging out the arp-cache and nd-cache entries for given time multiplied by 3 in seconds.
Use the no form of this command to remove the configuration.
Note: Not applicable for the AC port which is mapped with ELINE/Xconnect Service.
Note: After this timer interval, it sends out ARP to revalidate and 3 times of this would lead to removal of the dynamic entry.
Command Syntax
evpn mpls arp-nd refresh-timer <3-190>
no evpn mpls arp-nd refresh-timer
Parameters
<3-190>
Refresh timer value in seconds (age-out is refresh time * 3)
Command Mode
Config mode
Applicability
This command was introduced in OcNOS version 4.0.
Examples
#config mode
(config)#evpn mpls arp-nd refresh-timer 100
(config)#no evpn mpls arp-nd refresh-timer
Last modified date: 10/17/2023