OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : evi-name
evi-name
Use this command to name the EVPN MPLS ID.
Use the no form of this command to remove the name of the EVPN MPLS ID.
Command Syntax
evi-name <WORD>
no evi-name
Parameters
WORD
EVI name. Maximum limit 10 characters (shall not be only numeric).
Default
None
Command Mode
EVPN MPLS mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#evpn mpls id 3
(config-nvo)#evi-name vni_ELAN
(config-nvo)#exit
 
 
Last modified date: 10/17/2023