evpn esi hold-time
Use this command to allow some time for the evpn mpls tunnels and xconnect tunnel to come at the time of evpn mpls initialization before making the ESI up. This avoids traffic to be black-holed when a new PE is added and connected to an already running CE for multi-homing.
Use the no form of this command to make the esi up immediately when configuring the access-if cli.
Command Syntax
evpn esi hold-time <10-300>
no evpn esi hold-time
Parameters
<10-300>
Hold time in seconds
Default
Default value is 0.
Command Mode
Configuration Mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)# evpn esi hold-time 100
(config)# exit
Last modified date: 10/17/2023