OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : evpn mpls enable
evpn mpls enable
Use this command to enable evpn mpls functionality.
Use the no version of this command to disable evpn mpls functionality.
Note: To make evpn mpls disable and enable effective, system reboot is required.
Command Syntax
evpn mpls enable
no evpn mpls enable
Parameters
None
Command Mode
Config mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)#evpn mpls enable
(config)#no evpn mpls enable
Last modified date: 10/17/2023