OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : evpn mpls vtep-ip-global
evpn mpls vtep-ip-global
Use this command to set the source IP address is used to establish BGP peering with neighbor MPLS Nodes and to establish the EVPN MPLS tunnels.
Use the no version of this command to delete the source IP address.
Command Syntax
evpn mpls vtep-ip-global A.B.C.D
no evpn mpls vtep-ip-global A.B.C.D
Parameters
A.B.C.D
IPv4 address type.
Command Mode
Config mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)#evpn mpls vtep-ip-global 10.10.11.1
(config)#no evpn mpls vtep-ip-global 10.10.11.1
Last modified date: 10/17/2023