hardware-profile statistics evpn-mpls
Use this command to enable or disable filter statistics in hardware for evpn mpls network counters.
Note: You need to save the configuration and do a reboot after giving this command.
Command Syntax
hardware-profile statistics evpn-mpls enable
hardware-profile statistics evpn-mpls disable
Parameters
None
Default
By default, evpn mpls statistics profile is disabled.
Command Mode
Config mode
Applicability
This command was introduced in OcNOS version 4.2.
Example
#configure terminal
(config)# hardware-profile statistics evpn-mpls enable
(config)# hardware-profile statistics evpn-mpls disable
Last modified date: 10/17/2023