OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : ipv6 address
ipv6 address
Use this command to set anycast flag for any configured subnets under IRB interface.
With this anycast gateway can be supported for multiple subnets.
Command Syntax
ipv6 address [ < X:X::X:X/M > | anycast]
Default
The default value is router mac
Parameters
anycast
Anycast flag
Command Mode
IRB_IF Mode
Applicability
The anycast flag was introduced in OcNOS version 6.3.0.
Example
(config)#interface irb1
(config-irb-if)# ipv6 address 1100::1/64 anycast
 
Last modified date: 10/17/2023