OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : map vpn-id
map vpn-id
Use this command to map a sub-interface to a tenant.
Use the no form of this command to remove the tenant.
Command Syntax
map vpn-id <1-16777215>
no map vpn-id <1-16777215>
Parameters
<1-16777215>
VNID
Command Mode
Access if evpn mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
#configure terminal
(config)#interface xe1.1 switchport
(config-if)#access-if-evpn
(config-access-if)#map vpn-id 1
(config-access-if)#end
Last modified date: 10/17/2023