show evpn mpls
Use this command to display the EVPN Information.
Command Syntax
show evpn mpls (|id <1-16777215>)
Parameters
<1-16777215>
EVID
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
MH-PE2#sh evpn mpls
EVPN-MPLS Information
=================
Codes: NW - Network Port
AC - Access Port
(u) - Untagged
VPN-ID EVI-Name EVI-Type Type Interface ESI VLAN DF-Status Src-Addr Dst-Addr
_______________________________________________________________________________________________________________________________
6001 ---- L2 NW ---- ---- ---- ---- 102.1.1.1 101.1.1.1
6001 ---- L2 NW ---- ---- ---- ---- 102.1.1.1 105.1.1.1
6001 ---- -- AC xe1.301 --- Single Homed Port --- ---- ---- ---- ----
6001 ---- -- AC po10.301 00:00:00:00:00:15:15:00:00:00 ---- DF ---- ----
6002 ---- L2 NW ---- ---- ---- ---- 102.1.1.1 101.1.1.1
6002 ---- L2 NW ---- ---- ---- ---- 102.1.1.1 105.1.1.1
6002 ---- -- AC po10.302 00:00:00:00:00:15:15:00:00:00 ---- NON-DF ---- ----
Total number of entries are 7
MH-PE2#
Last modified date: 10/17/2023