show evpn mpls counters
This command to display the ingress/egress evpn-mpls network port statistic counters for both BUM and known unicast data traffic.
Note: To see the statistics, you must enable the command hardware-profile statistics evpn-mpls enable and reboot the board for the command to take effect.
Command syntax
show evpn mpls counters ((network (ingress|(egress dst <A.B.C.D>)))| vpn-id <1-16777215> (network (ingress|(egress dst <A.B.C.D>))))
Parameters
<1-16777215>
VPN identifier
A.B.C.D
Ipv4 address
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 4.2.
Examples
DUT2#show evpn mpls counters network egress
+----------+---------------+-----------+-----------+
| VPN-ID | DESTINATION | BUM | Unicast |
| | PEER | TX (pkts) | TX (pkts) |
+----------+---------------+-----------+-----------+
2000 2.2.2.2 140136 68900
1999 2.2.2.2 140138 68899
1998 2.2.2.2 140136 68899
1997 2.2.2.2 140137 68897
DUT2#
DUT2#show evpn mpls counters network ingress
+----------+-----------+-----------+
| VPN-ID | BUM | Unicast |
| | RX (pkts) | RX (pkts) |
+----------+-----------+-----------+
30 0 800122
10 0 727383
4001 5 727362
3003 0 0
3002 727368 0
3001 3 727364
DUT2#
Last modified date: 10/17/2023