show evpn mpls static host state
Use this command to display the state of the host which is configured statically.
Command Syntax
show evpn mpls static host state
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
MH-PE2#sh evpn mpls static host status
MPLS Static Host Information
=============================
Codes: NW - Network Port
AC - Access Port
(u) - Untagged
VNID Ifname Outer-Vlan Inner-vlan Ip-Addr Mac-Addr Status
___________________________________________________________________________________________________________
6001 po10.301 --- --- 0.0.0.0 0000.0000.aa11 Active
6001 po10.301 --- --- 12.12.12.10 0000.0000.aa12 Active
6001 po10.301 --- --- 1201::10 0000.0000.aa13 Active
Total number of entries are 3
MH-PE2#
Last modified date: 10/17/2023