OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : show evpn mpls tunnel label
show evpn mpls tunnel label
Use this command to display the label details of the EVPN tunnels.
Command Syntax
show evpn mpls tunnel label
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 3.0 and RSVP multipath was introduced in OcNOS version 5.0.
Example
PE1#show evpn mpls tunnel label
EVPN-MPLS Network tunnel labels
(*) in Policy - tunnel-policy inherited from mac-vrf
================+===========+=========+===============+=========+=========+=========+=========+============+=========+============+========
Local Remote RSVP-Multipath Underlay
Destination Status VPN-ID Policy MC-Label UC-Label MC-Label UC-Label Grp-Name NHLFE-ix NW-Intf NW-Label
================+===========+=========+===============+=========+=========+=========+=========+============+=========+============+========
3.3.3.3 Installed 601 -- 640 17 640 17 -- -- xe10 24320
3.3.3.3 Installed 801 -- 641 18 641 18 -- -- xe10 24320
4.4.4.4 Installed 1601 -- 642 20 640 17 MP1 12 NA NA
4.4.4.4 Installed 1801 -- 643 21 641 18 MP1 12 NA NA
Total number of entries are 4
PE1#
 
 
 
Last modified date: 10/17/2023