show evpn mpls xconnect
Use this command to display the VPWS xconnect details of the MTU, AC-NW connections, and network status.
Command Syntax
show evpn mpls xconnect
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
Remote-PE3#sh evpn mpls xconnect
EVPN-MPLS Xconnect Info
========================
AC-AC: Local-Cross-connect
AC-NW: Cross-connect to Network
AC-UP: Access-port is up
AC-DN: Access-port is down
NW-UP: Network is up
NW-DN: Network is down
NW-SET: Network and AC both are up
Local Remote Connection-Details
================================ ============ ===================================================================================
VPN-ID EVI-Name MTU VPN-ID Source Destination PE-IP MTU Type NW-Status
================================ ============ ===================================================================================
11 ---- 1500 10 xe1.10 00:00:00:00:00:15:15:00:00:00 102.1.1.1 1500 AC-NW NW-SET
101.1.1.1 1500 ---- ----
40 ---- 1500 30 xe2.2 --- Single Homed Port --- 102.1.1.1 1500 AC-NW NW-SET
Total number of entries are 2
Remote-PE3#
Last modified date: 10/17/2023