show evpn mpls xconnect tunnel
Use this command to view the active EVPN MPLS Tunnels for ELINE.
Command Syntax
show evpn mpls xconnect tunnel (| summary)
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
PE1#
PE1#show evpn mpls xconnect tunnel
EVPN-MPLS Network tunnel Entries
Source Destination Status Up/Down Update local-evpn-id remote-evpn-id
========================================================================================================
101.1.1.1 105.1.1.1 Installed 01:25:48 01:25:48 50 60
101.1.1.1 105.1.1.1 Installed 00:07:53 00:07:53 30 40
101.1.1.1 105.1.1.1 Installed 00:07:55 00:07:55 10 20
Total number of entries are 3
PE1#
Last modified date: 10/17/2023