show evpn mpls xconnect tunnel label
Use this command to display the label details of EVPN tunnels for ELINE.
Command Syntax
show evpn mpls xconnect tunnel label
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 4.0 and RSVP-Multipath is introduced in OcNOS version 5.0.
Example
PE1#
PE1#show evpn mpls xco tunnel label
EVPN-MPLS Network tunnel labels
(*) in Policy - tunnel-policy inherited from mac-vrf
================+===========+=========+=========+===============+=========+=========+============+=========+============+=========
Local Remote Local Remote RSVP-Multipath Underlay
Destination Status VPWS-ID VPWS-ID Policy UC-Label UC-Label Grp-Name NHLFE-ix NW-Intf NW-Label
================+===========+=========+=========+===============+=========+=========+============+=========+============+=========
3.3.3.3 Installed 501 1 -- 16 16 MP2 10 NA NA
4.4.4.4 Installed 1501 1001 -- 19 16 -- -- xe10 24320
Total number of entries are 2
PE1#
Last modified date: 10/17/2023