show running-config evpn mpls
Use this command to display the current running configuration of EVPN MPLS.
Command Syntax
show running-config evpn mpls
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
#show running-config evpn mpls
!
evpn mpls enable
!
evpn mpls vtep-ip-global 101.1.1.1
!
evpn mpls multihoming enable
!
evpn esi hold-time 30
!
evpn mpls mac-ageing-time 180
!
evpn mpls arp-nd refresh-timer 60
!
evpn mpls id 10 xconnect target-mpls-id 20
host-reachability-protocol evpn-bgp l2vrf5
!
vpn-id 1001
host-reachability-protocol evpn-bgp l2vrf1
mac-holdtime 300
evi-name ELANE
!
interface xe1.2 switchport
access-if-evpn
map vpn-id 1001
dynamic-learning disable
arp-nd flood-suppress
mac-holdtime 200
arp-cache disable
nd-cache disable
mac 0000.0000.aa31
mac 0000.0000.aa32 ip 12.12.12.10
mac 0000.0000.aa33 ipv6 1201::1
!
interface xe1.10 switchport
encapsulation dot1q 10
access-if-evpn
map vpn-id 10
!
Last modified date: 10/17/2023