learning disable (Interface VPLS Mode)

OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : Virtual Private LAN Service Commands : learning disable (Interface VPLS Mode)

Use this command to disable learning on a particular Attachment Circuit (AC) interface.

Use the learning enable command to enable learning on a particular AC interface.

Note: This command disables MAC learning only on that interface.

Command Syntax

learning disable

Parameter

None

Default

By default, learning disable is disabled

Command Mode

Interface VPLS mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

#configure terminal

(config)#interface eth0

(config-if)#mpls-vpls vpls1 service-template st1

(config-if-vpls)#learning disable

(config-if-vpls)#exit

Last modified date: 10/17/2023