OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : Virtual Private LAN Service Commands : show mpls vpls
show mpls vpls
Use this command to display logging information configured for MPLS.
Command Syntax
show mpls vpls
show mpls vpls detail
show mpls vpls mesh
show mpls vpls NAME
show mpls vpls NAME mesh
show mpls vpls NAME spoke
show mpls vpls spoke
show mpls vpls count
Parameters
detail
Display detailed VPLS information
mesh
Display MPLS VPLS Mesh Forwarding information. Use this parameter to display information about all core Virtual Circuit (VC) connections for all VPLS instances. Give the name of a VPLS instance to display information about that instance.
NAME
Display the identifying string for the VPLS domain
spoke
Display MPLS VPLS Spoke Forwarding information. Use this parameter to display information about all spoke VC connections for all VPLS instances. Give the name of a VPLS instance to display information about that instance.
count
Display the count of VPLS instances
Command Mode
Exec and Privileged Exec modes
Applicability
This command was introduced before OcNOS version 1.3.
Examples
Using show mpls vpls command without parameters displays information about all VPLS instances.
The example below displays information about the VPLS instance v1, returned when using the NAME parameter.
#show mpls vpls t1
Virtual Private LAN Service Instance: t1, ID: 1
Group ID: 0, VPLS Type: Ethernet VPLS, Configured MTU: 0
Description: none
Configured interfaces: none
Mesh Peers: 192.168.0.80 (Up)
192.168.0.90 (Up)
Spoke Peers: t100 (Up)
#
 
Table 3-22 explains the show command output fields.
 
Table 3-22: show mpls vpls t1 output field
Field
Description
Virtual Private LAN Service Instance
Number of VPLAN service instance.
ID
VPLAN identification detail for service instance.
Group ID
Group identification detail for VLAN.
VPLS Type
Type of VPLS in the interface.
Configured MTU
Number of configured MTU in the VPLs.
Description
Details of VPLS.
Configured interfaces
Description of the configured interfaces.
Mesh Peers
Configuring the VPLS mesh peers.
Spoke Peers
Configuring the VPLS spoke peers.
 
 
The example below displays the name of the VPLS instance, its ID, they type of instance (Ethernet), the M and S peers, and the signaling protocol. For the first entry, the signaling protocol is BGP and for the second entry it is LDP.
#show mpls vpls
Name VPLS-ID Type MPeers SPeers SIG-Protocol
v1 100 Ethernet 1 0 BGP
v3 300 Ethernet 1 0 LDP
 
 
Table 3-23 explains the show command output fields.
 
Table 3-23: show mpls vpls output field
Field
Description
Name
Type of the MPLS protocol.
VPLS-ID
Identification detail of VPLS.
Type
Type of VPLS in MPLS protocol.
Mesh Peers
Configuring the VPLS mesh peers.
Spoke Peers
Configuring the VPLS spoke peers.
SIG-Protocol
Type of protocol in MPLS configuration.
 
 
 
 
The example below displays the output when using the detail parameter. It displays information for VPLS instance v1, including the signaling protocol.
#show mpls vpls detail
Virtual Private LAN Service Instance: vpls1, ID: 10
SIG-Protocol: LDP
Attachment-Circuit :UP
Learning: Enabled
Group ID: 0, VPLS Type: Ethernet VLAN, Configured MTU: 1500
Description: none
service-tpid: dot1.q
Operating mode: Tagged
Svlan Id: 0
Svlan Tpid: 8100
Configured interfaces:
Interface: xe39
 
Service-template : t1
Match criteria : Accept all
Mesh Peers:
2.2.2.2 (Up)
 
Table 3-24 explains the show command output fields.
 
Table 3-24: show mpls vpls details output field
Field
Description
Virtual Private LAN Service Instance
Number of VPLS service instance.
ID
VPLS identification detail for service instance.
SIG-Protocol
Type of protocol in MPLS configuration.
Attachment-Circuit
Details of the attached circuit in interface.
Learning
State of the interface.
Group ID
Group identification detail for VLAN.
VPLS Type
Type of VPLS in MPLS protocol.
Configured MTU
Number of configured MTU in the VPLs.
Description
Details of VPLS.
Service-tpid
Service TP identifier configured for the VPLS PW.
Operating mode
Type of mode in the interface.
Svlan Id
Configures a specific virtual LAN (VLAN).
Svlan Tpid
Service vlan TP identifier for the VPLS PW.
Redundancy admin role
Creating a Backup Administrator Role.
Redundancy oper role
Operational Role of the VPLS instance.
Configured interfaces
Details of the configured interfaces.
Interface
Selects an interface to configure.
Oper-state
Displays the current status of the cross-connect segment – Up or Down.
Service-template
Used to configure advanced service-related option.
Match criteria
Identifies prefix characteristics (network, BGP path attribute, nexthop, and so on) for a specific sequence.
Mesh Peers
Configuring the VPLS mesh peers.
PW Status Local
Used to perform limited local configuration changes, monitor device status and utilization, and simple local troubleshooting.
Remote
PW status of Remote end.
 
The example below displays the output provided when using the mesh parameter without a specific VPLS name.
VPLS-ID Peer Addr Tunnel-Label In-Label Network-Intf Out-Label Lkps/St PW-INDEX SIG-Protocol
100 2.2.2.2 N/A 52503 eth2 53258 0/Dn 2 BGP
300 2.2.2.2 N/A none N/A none 0/Dn 1 LDP
 
 
Table 3-25 explains the show command output fields.
 
Table 3-25: show mpls vpls output field
Field
Description
VPLS-ID
Identification details of the VPLS.
Peer Addr
IP address of the peer device.
Tunnel-Label
Tunnel label used for the next segment.
In-label
Displays the ingress (incoming interface) label for this segment.
Out-Label
Label received from downstream neighbor for route.
Network-Intf
Installed as a result of configuring an interface.
Lkps/St
Opcode and Status of the VPLS PW.
PW-INDEX
Index of the VPLS entry in PW table.
SIG-Protocol
Signaling protocol used for VPLS labels advertisement.
 
The following is a sample output of the show mpls vpls detail command displaying detailed information about all configured VPLS instances.
#show mpls vpls detail
Virtual Private LAN Service Instance: vpls3100, ID: 3100
SIG-Protocol: BGP
Route-Distinguisher :65010:3100
Route-Target :65010:3100
VE-ID :31
Attachment-Circuit :UP
Learning: Enabled
Group ID: 0, Configured MTU: 9216
Description: none
service-tpid: dot1.q
Operating mode: Raw
Configured interfaces:
Interface: xe26
Service-template : vpls3100_3100_13100
Match criteria : 3100
Action type : Translate
Action value : 4075
Outgoing tpid : dot1.q
 
Mesh Peers:
2.2.2.2 (Up)
 
Table 3-26 explains the show command output fields.
 
Table 3-26: show mpls vpls details output field
Field
Description
Virtual Private LAN Service Instance
Number of VPLS service instance.
 
ID
VPLS identification detail for service instance.
SIG-Protocol
Type of protocol in MPLS configuration.
Attachment-Circuit
Details of the attached circuit in interface.
Learning
State of the interface.
Group ID
Group identification detail for VLAN.
VPLS Type
Type of VPLS in MPLS protocol.
Configured MTU
Number of configured MTU in the VPLs.
Description
Details of VPLS.
Service-tpid
Service TP identifier configured for the VPLS PW.
Operating mode
Type of mode in the interface.
Svlan Id
Configures a specific virtual LAN (VLAN).
Svlan Tpid
Service vlan TP identifier for the VPLS PW.
Redundancy admin role
Creating a Backup Administrator Role.
Redundancy oper role
Operational Role of the VPLS instance.
Configured interfaces
Details of the configured interfaces.
Interface
Selects an interface to configure.
Oper-state
Displays the current status of the cross-connect segment – Up or Down.
Service-template
Used to configure advanced service-related option.
Match criteria
Identifies prefix characteristics (network, BGP path attribute, nexthop, and so on) for a specific sequence.
Mesh Peers
Configuring the VPLS mesh peers.
PW Status Local
Used to perform limited local configuration changes, monitor device status and utilization, and simple local troubleshooting.
Remote
PW status of Remote end.
 
The following is a sample output of the show mpls vpls mesh command displaying information about all the core VC connections for all VPLS instances.
#show mpls vpls mesh
VPLS-ID Peer Addr In-Intf In-Label Out-Intf Out-Label Lkps/St PW-INDEX SIG-Protocol Status Ecmp-Group
1 192.168.0.80 eth0 16 eth0 640 1/Up 1 BGP Active N/A
1 192.168.0.90 eth1 18 eth1 642 1/Up 2 BGP Active N/A
2 192.168.0.80 eth0 19 eth0 641 1/Up 1 BGP Active N/A
2 192.168.0.90 eth1 17 eth1 643 1/Up 2 BGP Active N/A
#
 
Table 3-27 explains the show command output fields.
 
Table 3-27: show mpls vpls mesh output field
Field
Description
VPLS-ID
Identification details of the VPLS.
Peer Addr
IP address of the peer device.
In-Intf
Installed as a result of configuring an interface.
In-label
Displays the ingress (incoming interface) label for this segment.
Out-Label
Label received from downstream neighbor for route.
Network-Intf
Installed as a result of configuring an interface.
Lkps/St
Opcode and Status of the VPLS PW.
PW-INDEX
Psuedo wire index
SIG-Protocol
Signalling protocol
Status
Status of Psuedo wire
Ecmp-Group
Equal cost multi path group
 
The following is a sample output of the show mpls vpls spoke displaying the spoke VC connection to the VPLS instance.
#show mpls vpls spoke
VPLS-ID Virtual Circuit In-Intf In-Label Out-Intf Out-Label Lkps/St
1 t100 eth2 20 eth2 640 1/Up
#
 
Table 3-28 explains the show command output fields.
 
Table 3-28: show mpls vpls spoke output field
Field
Description
VPLS-ID
Identification details of the VPLS.
Virtual Circuit
Used in transportation of data over a packet switch computer network.
In-Intf
Installed as a result of configuring an interface.
In-label
Displays the ingress (incoming interface) label for this segment.
Out-Label
Label received from downstream neighbor for route.
Network-Intf
Installed as a result of configuring an interface.
Lkps/St
Opcode and Status of the VPLS PW.
 
The following is a sample output of show mpls vpls count displaying information about total, active and inactive vpls instances.
#show mpls vpls count
-------------------------------
Total VPLS instances : 2
Active VPLS instances : 2
Inactive VPLS instances : 0
-------------------------------
 
Table 3-29 explains the show command output fields.
 
Table 3-29: show mpls vpls count output field
Field
Description
Total VPLS instances
Number of total VPLS instance.
Active VPLS instances
Number of active VPLS instance.
Inactive VPLS instances
Number of inactive VPLS instance.
 
Last modified date: 10/17/2023