show ip ospf igp-shortcut-route
Use this command to show the IGP shortcut route calculated by OSPF.
Command Syntax
show ip ospf (<0-65535>|) igp-shortcut-route
Parameters
<0-65535>
ID of the router process.
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip ospf igp-shortcut-route
OSPF process 0:
8.8.8.8/32 [2] tunnel-id: 101, 8.8.8.8
15.15.15.15/32 [0] tunnel-id: 101, 8.8.8.8
20.20.15.0/24 [0] tunnel-id: 101, 8.8.8.8
Table 1-41 explains the fields in the output.
Table 1-41: show ip igp-shortcut-route output details
Field | Description |
|---|
OSPF process | OSPF process identifier. |
Destination | IP address of the destination port. |
Metric | Number of tunnel metric. |
Tunnel-ID | Tunnel address (destination port) for the session. |
Tunnel-End-Point | Tunnel endpoint address of ospf. |
Last modified date: 10/16/2023