OcNOS-SP : Segment Routing Guide : Path Computation Element Communication Protocol Command Reference : PCEP Commands : deadtimer
deadtimer
Use this command to set the dead timer.
Use the no form of this command to set the dead timer to its default (120 seconds).
Command Syntax
deadtimer <1-255>
no deadtimer
Parameters
<1-255>
The keepalive dead interval in seconds. The default value is 120 seconds (4 times the keepalive default value).
Default
120 seconds
Command Mode
PCEP mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#pce configuration 127
(config-pcep)#deadtimer 98
Last modified date: 10/20/2023