OcNOS-SP : Multicast Guide : Protocol Independent Multicasting Command Reference : PIMv6 Commands : show ipv6 pim local-members
show ipv6 pim local-members
Use this command to display information about local membership for PIM interfaces.
Command Syntax
show ipv6 pim local-members
show ipv6 pim local-members IFNAME
show ipv6 pim (vrf NAME|) local-members
show ipv6 pim (vrf NAME|) local-members IFNAME
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
IFNAME
Display neighbors for an interface name
Command Mode
Privileged Exec and Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ipv6 pim local-members
PIM Local membership information
 
eth1:
(*, ff05::2) : Include
 
eth2:
(*, ff05::2) : Include
(*, ff1e::10) : Include
#
Table 2-31 explains the fields for each pim entry.
 
Table 2-31: show ipv6 pim local-members output
Entries
Description
Port
Port name
(*, G)
State that maintains the Rendezvous Point for the Group (G).
Last modified date: 10/20/2023