OcNOS-SP : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : Show Commands : show debugging rsvp
show debugging rsvp
This command displays the status of the options selected by the debug RSVP command.
Command Syntax
show debugging rsvp
Parameters
None
Command Mode
Exec and Privileged Exec modes
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show debugging rsvp
NSM debugging status:
RSVP event debugging is on
RSVP packet debugging is on
RSVP incoming packet debugging is on
RSVP outgoing packet debugging is on
RSVP hexadecimal dump debugging is on
#
 
Table 7-55 explains the show command output fields.
 
Table 7-55: show debugging rsvp output fields
Field
Description
NSM debugging status
Debugging is enabled or disabled on a per-interface basis, using the commands.
 
 
Last modified date: 10/17/2023