OcNOS-SP : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : Show Commands : show rsvp neighbor
show rsvp neighbor
Use this command to display a list of IPv4 RSVP neighbors or just a single IPv4 RSVP neighbor.
Command Syntax
show rsvp neighbor
show rsvp neighbor A.B.C.D
Parameters
A.B.C.D
Use this parameter to display the IP address of the IPv4 RSVP neighbor.
Command Mode
Exec and Privileged Exec modes
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show rsvp neighbor
IP Address UpStrm LSP DnStrm LSP RefreshReduc Srefresh In Type
10.10.20.4 0 1 Enabled 5s Implicit
10.10.23.2 0 1 Enabled 8s Implicit
#
 
Table 7-61 explains the show command output fields.
 
Table 7-61: show rsvp neighbor output field
Field
Description
IP Address
Address for the interface.
UpStrm LSP
Specify the upstream label for the bidirectional label-switched path (LSP).
DnStrm LSP
Specify the dnstream label for the bidirectional label-switched path (LSP).
Refresh Reduc
Refresh reduction improves the scalability, latency, and reliability of Resource Reservation Protocol (RSVP) signaling to enhance network performance and message delivery.
Srefresh In
Remaining seconds for srefresh timer expiry.
Type
Type of neighbor interface.
 
Last modified date: 10/17/2023