ip dhcp server (interface mode)

OcNOS-SP : System Management Guide : System Management Command Reference : DHCP Server Commands : ip dhcp server (interface mode)

Use this command to configure an interface as a DHCP server starting interface.

Use the no form of this command to remove an interface as a DHCP server starting interface.

Command Syntax

ip dhcp server

no ip dhcp server

Parameters

None

Default

No default value is specified

Command Mode

Interface mode

Applicability

This command was introduced in OcNOS version 6.1.0.

Examples

#configure terminal

(config)#interface eth2

(config-if)#ip dhcp server

Last modified date: 10/19/2023