DHCP Server Commands

OcNOS-SP : System Management Guide : System Management Command Reference : DHCP Server Commands

This chapter describes the Dynamic Host Configuration Protocol (DHCP) server commands.

A DHCP server is a network server that automatically provides and assigns IP addresses, default gateways, and other network parameters to client devices. A DHCP server relies on the standard protocol known as Dynamic Host Configuration Protocol or DHCP to respond to broadcast queries by clients.

This chapter contains these commands:

• address range low-address A.B.C.D (high-address A.B.C.D|)

• address range low-address X:X::X:X (high-address X:X::X:X|)

• boot-file

• dns-server A.B.C.D

• dns-server X:X::X:X

• domain-name

• host-name

• ip dhcp server (interface mode)

• ip dhcp server default-lease-time

• ip dhcp server max-lease-time

• ip dhcp server pool