ip dhcp server default-lease-time
Use this command to set the default lease time for the DHCP server to be shared with the DHCP client.
Use the no form of this command to delete the IPv4 default lease time configuration.
Command Syntax
ip dhcp server default-lease-time SECONDS
no ip dhcp server default-lease-time
Parameters
SECONDS
Default lease time in seconds. Default is 86400 seconds.
Default
Default value is 86400 seconds
Command Mode
Configure mode
VRF mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Examples
#configure terminal
(config)#ip dhcp server default-lease-time 500
#configure terminal
(config)#ip vrf vrf1
(config-vrf)#ip dhcp server default-lease-time 400
Last modified date: 10/19/2023