OcNOS-SP : System Management Guide : System Management Command Reference : DHCP Server Commands : ipv6 dhcp server (interface mode)
ipv6 dhcp server (interface mode)
Use this command to set an interface as a DHCPv6 server starting interface.
Use the no form of this command to remove an interface as a DHCPv6 server starting interface.
Command Syntax
ipv6 dhcp server
no ipv6 dhcp server
Parameters
None
Default
No default value is specified
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Examples
#configure terminal
(config)#interface eth2
(config-if)#ipv6 dhcp server
Last modified date: 10/19/2023