OcNOS-SP : System Management Guide : System Management Command Reference : DHCP Server Commands : ipv6 dhcp server preference
ipv6 dhcp server preference
Use this command to make a DHCPv6 server preferred.
Use the no form of this command to disable a server preference.
Command Syntax
ipv6 dhcp server preference
no ipv6 dhcp server preference
Parameters
None
Default
No default value is specified
Command Mode
Configure mode
VRF mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Examples
#configure terminal
(config)#ipv6 dhcp server preference
 
#configure terminal
(config)#ip vrf vrf1
(config-vrf)#ipv6 dhcp server preference
Last modified date: 10/19/2023