ipv6 dhcp server rapid-commit
Use this command to enable the DHCP client to obtain configuration parameters from the server through a rapid two message exchange (solicit and reply).
Use the no form of this command to disable the IPv6 DHCP server rapid-commit option.
Command Syntax
ipv6 dhcp server rapid-commit
no ipv6 dhcp server rapid-commit
Parameters
None
Default
No default value is specified
Command Mode
Configure mode
VRF mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Examples
#configure terminal
(config)#ipv6 dhcp server rapid-commit
#configure terminal
(config)#ip vrf vrf1
(config-vrf)#ipv6 dhcp server rapid-commit
Last modified date: 10/19/2023