ntp-server A.B.C.D
Use this command to specify an NTP server in the IPv4 DHCP server pool. Multiple NTP servers can be added to the pool.
Use the no form of this command to delete an NTP server from the IPv4 DHCP server pool.
Command Syntax
ntp-server A.B.C.D
no ntp-server A.B.C.D
Parameters
A.B.C.D
NTP IPv4 server address
Default
No default Value is specified
Command Mode
DHCP configure mode
Applicability
This command was introduced in OcNOS version 6.1.0.
Examples
#configure terminal
(config)#ip dhcp server pool test-pool
(dhcp-config)#ntp-server 10.12.43.97
#configure terminal
(config)#ip vrf vrf1
(config-vrf)#ip dhcp server pool test-pool
(dhcp-config)#ntp-server 10.12.43.97
Last modified date: 10/19/2023