OcNOS-SP : System Management Guide : System Management Command Reference : Interface Commands : show interface capabilities
show interface capabilities
Use this command to display interface capabilities
Command Syntax
show interface (IFNAME|) capabilities
Parameters
IFNAME
Displays the name of a specific interface for which status and configuration data is desired.
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show interface xe1/1 capabilities
xe1/1
Speed(FD) : 10MB,100MB,1000MB,10GB,20GB,40GB
Interface : xgmii
Medium : copper
Loopback : none,MAC,PHY
Pause : pause_tx,pause_rx,pause_asymm
Flags : autoneg
Encap : IEEE,HIGIG,HIGIG2
 
Table 21-51 explains the show command output fields.
 
Table 21-51: show interface capabilities output details
Field
Description
Interface number
The identifying ID number of the interface – eht0, xe1, etc.
Speed (FD)
The Flexible Data-Rates (FD) of the interface
interface
XAUI is a standard for extending the XGMII (10 Gigabit Media Independent Interface) between the MAC and PHY layer of Gigabit Ethernet.
Medium
Members have to have the same medium type configured. This only applies to
Ethernet port-channel. Copper, fiber optics, etc.
Loop back
The loop back between the MAC and PHY layers.
Pause
Pause transmit, pause receive, pause asymmetrically.
Flags
Interface flags set for Auto-negotiation.
Encap
Encapsulation – IEEE, HIGIG, and HIGIG2 specifications – HIGIG is a proprietary protocol that is implemented by Broadcom. The HIGIG protocol supports various switching functions. The physical signaling across the interface is XAUI, four differential pairs for receive and transmit (SerDes), each operating at 3.125 Gbit/s.
Last modified date: 10/19/2023