show ntp authentication-keys

OcNOS-SP : System Management Guide : System Management Command Reference : Network Time Protocol : show ntp authentication-keys

Use this command to display authentication keys.

Command Syntax

show ntp authentication-keys

Parameters

None

Command Mode

Exec mode and Privileged Exec mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

#sh ntp authentication-keys

--------------------------

Auth Key MD5 String

--------------------------

123 0xa2cb891442844220

Table 14-23 explains the output fields.

Table 14-23: show ntp authentication-key fields
Entry	Description
Auth key	Authentication key (password). Use the password to verify the authenticity of packets sent from this interface or peer interface.
MD5 String	One or more MD5 key strings. The MD5 key values can be from 1 through 16 characters long. You can specify more than one key value within the list.

Last modified date: 10/19/2023