OcNOS-SP : System Management Guide : System Management Command Reference : Simple Network Management Protocol : show snmp host
show snmp host
Use this command to display the SNMP trap hosts.
Command Syntax
show snmp host
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#show snmp host
---------------------------------------------------------------------------
Host Port Version Level Type SecName
---------------------------------------------------------------------------
 
10.10.26.123 162 2c noauth trap test
 
Table 17-34 explains the output fields.
 
Table 17-34: Show snmp host output
Entry
Description
Host
The IP address of the SNMP host server.
Port
The port being used for SNMP traffic.
Version
SNMP version number.
Level
The security level being used.
Type
The type of SNMP object being sent.
SecName
Secure Name for this SNMP session.
Last modified date: 10/19/2023