OcNOS-SP : System Management Guide : System Management Command Reference : Trigger Failover Commands : show tfo
show tfo
Use this command to display FOG configuration and statistics.
Command Syntax
show tfo
Parameters
None
Default
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show tfo
 
TFO : Enable
 
Failover Group 1 : Enable
Failover Status : MPG Link Failure
No. of links to trigger failover : 0
MPG Port(s) :
xe9 Status : DOWN
xe12 Status : DOWN
CPG Port :
xe4 Status : DOWN
No. of times MPG link failure : 1
No. of times MPG link recovered : 0
No. of times CPG got auto disabled : 1
No. of times CPG got auto enable : 0
 
Table 30-87 Explains the show command output fields.
Table 30-87: show tfo output fields
Field
Description
Failover Group
Enable the failover group.
Failover Status
Display the failover status.
No. of links to trigger failover
Number of links to trigger the failover group.
MPG Port
Details of the monitor port group.
CPG Port
Details of the control port group.
 
 
Last modified date: 10/19/2023