OcNOS-SP : Layer 3 Guide : Two-Way Active Measurement Protocol Command Reference : TWAMP Commands : show twamp statistics
show twamp statistics
Use this command to display TWAMP test session.
Command Syntax
show twamp-statistics (WORD|)
Parameters
WORD
TWAMP test session name.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 3.0.
Examples
#show twamp statistics
=========================================
TWAMP Test-Session Statistics
=========================================
Test-Session Name : s1
Start Time : 2019 Aug 05 08:40:12
Elapsed time(milli sec) : 4004
Packets Sent : 4
Packets Received : 4
Packet Loss(%) : 0.0000
Round Trip Delay(usec)
Minimum : 585
Maximum : 2306
Average : 1038
Forward Delay(usec)
Minimum : 254
Maximum : 318
Average : 280
Reverse Delay(usec)
Minimum : 331
Maximum : 1988
Average : 758
Round Trip Delay Variation(usec)
Minimum : 2306
Maximum : 2640
Average : 2444
Forward Delay Variation(usec)
Minimum : 318
Maximum : 375
Average : 345
Reverse Delay Variation(usec)
Minimum : 1988
Maximum : 2265
Average : 2099
 
Table 1-79: show twamp statistics fields
Field
Description
Test-Session Name
TWAMP test session name
Start Time
TWAMP test start time
Elapsed time(milli sec)
Time taken to complete the test in milliseconds
Packets Sent
Number of packet sent
Packets Received
Number of packet received
Packet Loss(%)
Packet lost in percentage
Round Trip Delay(usec)
Round trip delay between TWAMP sender and reflector. Displayed Minimum, Maximum and Average round trip delay in micro-seconds
Forward Delay(usec)
Forward delay between TWAMP sender and reflector. Displayed Minimum, Maximum and Average forward delay in micro-seconds In case the clocks on the sender and reflector are not in sync, a (*) will be displayed here.
Reverse Delay(usec)
Reverse delay between TWAMP reflector and sender. Displayed Minimum, Maximum and Average reverse delay in micro-seconds In case the clocks on the sender and reflector are not in sync, a (*) will be displayed here.
Round Trip Delay Variation(usec)
Round trip delay variation between TWAMP sender and reflector. Displayed Minimum, Maximum and Average round trip delay variation in micro-seconds
Forward Delay Variation(usec)
Forward delay variation between TWAMP sender and reflector. Displayed Minimum, Maximum and Average forward delay variation in micro-seconds In case the clocks on the sender and reflector are not in sync, a (*) will be displayed here.
Reverse Delay Variation(usec)
Reverse delay variation between TWAMP reflector and sender. Displayed Minimum, Maximum and Average reverse delay variation in micro-seconds In case the clocks on the sender and reflector are not in sync, a (*) will be displayed here.
 
 
Last modified date: 10/16/2023