OcNOS-SP : Layer 3 Guide : Two-Way Active Measurement Protocol Command Reference : TWAMP Commands : twamp-light reflector
twamp-light reflector
Use this command to initialize the TWAMP reflector.
Use the no form of this command to un-initialize and to remove the configured TWAMP light refelctor configurations.
Command Syntax
twamp-light reflector
no twamp-light reflector
Parameters
NA
Command Mode
Configuration mode
Applicability
This command was introduced before OcNOS version 3.0.
Examples
#configure terminal
(config)#twamp-light reflector
 
Last modified date: 10/16/2023