NetConf Port Access Commands
This chapter describes NetConf Port Access commands.
feature netconf-ssh
Use this command to enable or disable the netconf-ssh feature specific to the management VRF. When netconf feature-ssh is enabled, it allows the logins through the default netconf-ssh port or through default ssh port if feature SSH is also enabled.
For complete the complete command reference, refer to
feature netconf-ssh section in
OcNOS Key Feature document, Release 6.4.1.
feature netconf-tls
Use this command to enable or disable the NetConf TLS feature specific to a VRF. When netconf feature-ssh is enabled, it allows the logins through the default netconf-tls port and allows login through a default TLS port when the TLS feature is also enabled.
For complete the complete command reference, refer to feature netconf-tls section in OcNOS Key Feature document, Release 6.4.1. netconf-ssh port
Use this command to either configure or unconfigure the custom NetConf SSH port.
For complete the complete command reference, refer to
netconf-ssh port section in
OcNOS Key Feature document, Release 6.4.1.
netconf-tls port
Use this command to either configure or unconfigure the indicated NetConf TLS port.
For complete the complete command reference, refer to
netconf-tls port section in
OcNOS Key Feature document, Release 6.4.1.
show netconf server
Use this command to display netconf server status.
For complete the complete command reference, refer to
show netconf server section in
OcNOS Key Feature document, Release 6.4.1.
show running-config netconf server
Use this command to display the NetConf server settings that appear in the running configuration.
For complete the complete command reference, refer to
show running-config netconf server section in
OcNOS Key Feature document, Release 6.4.1.