hardware-profile filter evpn-mpls-mh
Use this command to enable the hardware-profile for EVPN MPLS multihoming to successfully activate multi-homing in the hardware.
Before enabling EVPN MPLS multihoming (
evpn mpls multihoming enable command), give this command.
Before disabling the hardware-profile, disable EVPN MPLS multihoming.
Note: You need to save the configuration and do a reboot after giving this command.
Use the disable form of this command to disable the configured hardware-profile.
Command Syntax
hardware-profile filter evpn-mpls-mh enable
hardware-profile filter evpn-mpls-mh disable
Parameters
None
Default
By default, EVPN MPLS multihoming hardware-profile is disabled.
Command Mode
Config mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)# hardware-profile filter evpn-mpls-mh enable
(config)# hardware-profile filter evpn-mpls-mh disable
Last modified date: 10/17/2023