show ip source-interface detail
Use this command to display the IPv4 source interface status in detail.
Command Syntax
show ip source-interface detail
Parameters
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#show ip source-interface detail
Source-Interface Detailed Information
=====================================
Protocol : tacacs+
Interface : lo
Address : 1.1.1.1
Status : Active
VRF Name : Default
Protocol : radius
Interface : lo
Address : 1.1.1.1
Status : Active
VRF Name : Default
Table 36-107 explains the output fields.
Table 36-107: Output fields
Field | Description |
|---|
Protocol | tacacs+, ntp, snmp, syslog, or radius |
Interface | Interface name (lo or physical interface) |
Address | IP address |
Status | Whether active or inactive |
VRF Name | Virtual Routing and Forwarding name |
Last modified date: 10/19/2023