Source Interface Commands

OcNOS-SP : System Management Guide : System Management Command Reference : Source Interface Commands

This chapter is a reference for source interface commands. The source Interface feature routes management traffic to a dedicated interface using iptables NAT rules.

The source interface feature is supported for the protocols shown in Table 36-106.

Table 36-106: Source interface protocols and port numbers
Protocol	Default port number
Tacacs+	49
Radius	1812 and 1813
Snmp	161 and 162
Ntp	123
Syslog	514

Note: Because management applications are allowed only on the default and management VRF, the commands in this chapter are supported on the "management" and "default" VRFs only.

This chapter contains these commands:

• ip source-interface

• ipv6 source-interface

• show ip source-interface detail

• show ipv6 source-interface detail

• show running-config ip source-interface

• show running-config ipv6 source-interface

Last modified date: 10/19/2023