OcNOS-SP : System Management Guide : System Management Command Reference : Source Interface Commands : show ipv6 source-interface detail
show ipv6 source-interface detail
Use this command to display the IPv6 source interface status in detail.
Command Syntax
show ipv6 source-interface detail
Parameters
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#show ipv6 source-interface detail
Source-Interface Detailed Information
=====================================
Protocol : tacacs+
Interface : lo
Address : ::1
Status : Active
VRF Name : Default
 
Protocol : radius
Interface : lo
Address : ::1
Status : Active
VRF Name : Default
Table 36-107 explains the output fields.
 
Last modified date: 10/19/2023